Giant Revolt Advanced Pro 0 -gravelpyörä, ML (2302008146)

Revolt is a gravel bike that has also been successful in tests, with which you ride smoothly on all platforms. The pro-level carbon fiber frame is even lighter and absorbs vibrations better. With the "flip chip" adjustment of the rear fork, you can change the bike's behavior to be more agile or more stable. In the longer position, the rear fork can accommodate tires up to 53 mm wide, and in the shorter position, 42 mm wide. The carbon fiber D-fuse handlebar and seatpost are designed to filter vibrations and absorb shocks, so you can ride further. The bike also has Giant CXR 2 carbon fiber discs as standard, the lightness of which makes the bike accelerate lightning fast. Of course, the rims are already tubeless compatible: just add the included sealant to the tires and pump air into the tires.

The bike has a Shimano GRX 800 gearbox in the 2x11 version. The two front derailleur system offers small jumps between gears and a sufficient transmission scale for both road runs and tougher gravel climbs and bike touring with equipment.

Giant is the world's largest bicycle manufacturer. Giant bikes are also used at the world's top level in both road and off-road races.

Technical information:

• Body size: ML / 49 cm
  
• Recommended rider height: 174-186 cm
• Frame: Advanced-Grade Composite carbon fiber frame, 12x142mm thru-axle, disc, flip chip dropout
• Fork: Advanced-Grade Composite, full-composite OverDrive steerer, 12mm thru-axle, flat-mount disc
  
• Color: Charcoal Plum
  
• Shifters: Shimano GRX RX-810, 2x11
  
• Front derailleur: Shimano GRX RX-810
  
• Rear derailleur: Shimano GRX RX-810
• Rear wheel: Shimano CS-HG800, 11-y, 11-34
  
• Chain: KMC X11SL-1
  
• Cranks: Shimano GRX RX-810, 31-48
  
• Brake levers: Shimano GRX RX-810 hydraulic
  
• Front brake: Shimano GRX RX-810
  
• Rear brake: Shimano GRX RX-810
  
• Brake discs: Shimano SM-RT70, 160 mm
• Tires: Cadex AR, 700x40c, tubeless
  
• Rims: Giant CXR 2 Carbon Disc WheelSystem
  
• Front hub: Giant CXR 2 Carbon Disc WheelSystem, 12x100 mm, Centerlock
  
• Rear hub: Giant CXR 2 Carbon Disc WheelSystem, 12x142 mm, Centerlock
  
• Handlebar: Giant Contact XR D-Fuse 31.8mm, 44cm
  
• Handlebar bracket: Giant Contact, 8-speed, 80 mm
  
• Guide bearing: A-Head tapered
  
• Saddle: Giant Approach
  
• Seat post: Giant D-Fuse composite, 14 mm offset
  
• Pedals: Not included
  
• Fasteners: bottle rack ready for three racks, pannier screws in the down tube, places for a bottle holder in the front fork (2) and fender holders
  

The bike is delivered in the factory packaging, assembled almost ready to ride. If nothing else is stated for the bike, the level of stacking is 95%. With a few steps, you can get the bike ready to ride.

When installing the pedals, it is recommended to put grease or oil on the threads. You have to be careful that the left and right pedals go in the right direction. Start tightening with your fingers and only use the tool at the end. Tighten the pedals carefully.

Check the brake and gear adjustments before the first ride.

Small parts such as the clock and reflectors are generally loose, remember to install them for safe movement. Read more assembly tips in our general instructions.

We recommend that the bike is first serviced after 100-300 km of driving at a specialist bike service shop. If you have difficulties getting the bike ready for riding, you should contact an expert bike service.

Product availability may vary. The manufacturer reserves the right to make changes regarding colors, materials, components, technical data and models. The degree of completion, components and technical data may vary for different production batches.

Degrees of stacking:

• 98% "ready to ride" - E tire ring , pedals and seat post are not installed. The handlebar bracket must be turned to the correct position and tightened. The gears and brakes are already adjusted at the factory.
• 95% - E tire, pedals, seat post and handlebar are not installed . Check the tightness of the bolts and nuts. The gear and brake adjustments are ready except for fine tuning.
• 90% - Front tire, pedals, seat post and handlebar are not installed. The fenders and possible body are not installed. Check the tightness of the bolts and nuts. The adjustments of the gears and brakes are probably not correct.