Tech-Protect Glass Fit+ 2 vienetų rinkinys k tipo stiklo + Hydro Flex+ 2 vienetų rinkinys hidrogelio plėvelės - skaidriai (30860-0)

The Tech-Protect Easy Set Foil & Glass Fit+ 4in1 is a comprehensive screen protector that includes two types of protection in one package. The set includes two hydrogel films with mounting frames and two tempered glass panels – sufficient for long-lasting device protection.

Glass Fit+ tempered glass, 0.3 mm thick and with a 9H hardness rating, protects the display from scratches while maintaining full touchscreen sensitivity and crystal clarity. The oleophobic coating effectively repels fingerprints and makes cleaning easier.

The Hydro Flex+ hydrogel film, made of TPU, perfectly adapts to the screen's surface, including curved edges. It has self-healing properties—minor scratches incurred during use are automatically smoothed out. The film maintains full optical clarity and touch sensitivity.

* Due to the varying milling patterns of display edges, a slight air halo may appear around the screen after installing a protective film or glass. This is a natural occurrence and depends on the milling pattern of the screen in a given unit.

• 100% Original
• Packed in original packaging
• Glass Fit+ tempered glass
• Hydro Flex+ hydrogel foil
• Precise fit
• Full touchscreen sensitivity retained
• Crystal clarity – faithful color reproduction

2 × Tech-Protect Glass Fit+ tempered glass

2 × Tech-Protect Hydro Flex+ hydrogel film

1 × Foil mounting frame

2 × Installation kit

Tempered glass

1. Start installation in the bathroom right after taking a bath – the water vapor will absorb all the dust from the atmosphere and will not interfere with the installation.

2. Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.

3. Install the glass as evenly as you can – you can position it using the included installation tools.

4. Get rid of air bubbles by pressing firmly in circular motions for several dozen seconds – do this so that the adhesive layer bonds with the screen as strongly as possible.

Hydrogel foil

1. Start installation in the bathroom right after taking a shower – the water vapor will settle on the dust in the air, so it will not interfere with the installation.

2. Insert the phone into the special installation frame, making sure it is firmly seated in it.

3. Thoroughly clean and degrease the screen surface using the included wipe, then polish it with a dry cloth until it shines. Make sure there are no dust or dirt particles remaining on the screen.

4. Align the cutouts in the foil with the protrusions in the frame so that they fit perfectly.

5. Pull the inner layer of the screen protector from the center outward. This will automatically begin the process of applying the film to the screen.

6. Press the foil with a squeegee so that the adhesive layer adheres well to the screen surface.

7. Pull the inner layer of the film on the other side, also pulling from the center outwards, and then press it with the squeegee so that the adhesive layer bonds evenly to the screen over the entire surface.

8. Gently remove the outer protective film.

9. If air bubbles appear under the foil, press the entire surface thoroughly in circular motions for several dozen seconds until they disappear - this will ensure the strongest possible bond between the adhesive layer and the screen.