AXAGON USB-C 4-Port Hub with Ethernet and 0.2m Cable, HMC-GL3A

The slim metal USB-C 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMC-GL3A connects up to three USB devices to a laptop or computer and also adds a Gigabit network card to connect your computer to a high-speed network.

The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. The elegant, finely structured body surface resists fingerprints. The permanently fixed 20 cm long USB cable is ideal for users of mobile devices.

This compact multi-port hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, transfer speeds reach up to 5 Gb/s.

The Gigabit network adapter expands the computer with a fast and stable network connection, adds a missing RJ-45 network connector, or adds another network card. The LAN adapter is compatible with 10/100/1000 Mbit/s speeds and also offers a wide range of features, such as IPv4/IPv6 checksum offloading to reduce CPU load, crossover detection and auto-correction, TCP large send offload, support for various modes of the Wake-on-LAN feature, work with virtual LAN (VLAN), and advanced Power Management features. In modern operating systems from Windows 8.1 and above, the adapter allows for easy automatic installation without the need for an Internet connection.

The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and no network card. The hub can even be used to connect phones with USB-C connectors. You can connect a flash drive, keyboard, and mouse to your phone or tablet. Some phones and tablets with the Android operating system, such as the Samsung S9+, can be connected to the Internet via an Ethernet cable thanks to this hub.

Input:
• 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• Connecting USB Type-C male connector on a fixed 20 cm long cable.

Output:
• 3x SuperSpeed USB ports, USB-A female connectors.
• Supported transfer rates: 5,000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).
• The total bandwidth / transfer rate of the device is determined by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).
• The USB hub handles the permanent connection of several external drives.

RJ-45 Output:
• Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection.
• Supported transmission rates for the Ethernet interface: 10/100/1000 Mb/s.
• Supported specifications: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T.
• 10/100/1000 Mbit/s auto-detection.
• Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation.
• Supports TCP Large Send Offload V1 and V2.
• Supports IEEE 802.1P Layer 2 priority encoding & decoding.
• Supports IEEE 802.1Q VLAN tagging.
• Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduces power consumption during idle.
• Supports Jumbo frames.
• Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control.
• Supports Auto MDI/MDIX - crossover detection and auto-correction eliminates the need for crossover cables.
• Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors.<
• Supports Pair Swap/Polarity/Skew Correction.

Wake-on-LAN feature support in different modes:
• Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-up.
• Supports ECMA-393 proxZzzy® standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers.
• RealWoW! technology support allows remote wake up over the Internet.

Advanced Power Management features:
The adapter supports advanced power management to reduce losses during standby or light network traffic. It further supports advanced power saving when the Ethernet cable is disconnected.
• Supports Advanced Configuration Power Management Interface (ACpi).
• Supports Power Management offload (ARP & NS).
• Supports Microsoft Always On Always Connected (AOAC).
• Supports Intel Converged Platform Power Management (CPPM).
• Supports Link Power Management (LPM).
• Supports Operating System-directed Power Management (OSPM).
• Supports IEEE 802.3az EEE (Energy Efficient Ethernet).

Other features:
• Ability to connect your device while running thanks to Hot Plug support.
• Full Plug and Play support.
• Sleep mode support.
• The high-quality shielded cable ensures high communication speed and minimal interference.
• Power supply via USB bus (USB bus power).
• Dimensions: 90 x 23 x 13 mm.
• Weight: 38 g (including cable).
• USB cable length: 20 cm.

Supported OS:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32-bit and 64-bit versions of Windows OS are supported), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions (WARNING - check with the Android device manufacturer if the Ethernet connection is supported).

Package contains:
• SuperSpeed USB-C multi-port hub with fixed 20 cm long USB cable,
• printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
• packed in a cardboard box with a hanging hole. Axagon HMC-GL3A USB 3.2 Gen 1 hub with 3x USB-A + GLAN, metal, 20cm USB-C cable. Connectivity technology: Wired, Host interface: USB 3.2 Gen 1 (3.1 Gen 1) Type-C. Ethernet LAN data rates: 10,100,1000 Mbit/s, Networking standards: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 820.3x. Product colour: Black, Hub interfaces: RJ-45, USB 3.2 Gen 1 (3.1 Gen 1) Type-A, Housing material: Aluminium. Power supply type: USB. Width: 90 mm, Depth: 23 mm, Height: 13 mm