MOBILE ORIGIN Bike Phone Holder B1 with Anti-Shock & Vibration Reduction (MO-BPH-AS-B1)

Mobile Origin Bike Phone Mount B1 with Shock and Vibration Absorption

A handlebar phone mount that places four independent sets of spring dampeners between the road and your phone. They absorb impacts across two axes simultaneously, preventing every bump from transferring to your phone and its camera. Fits handlebars with a diameter of 17.5 to 30 mm and tightens by hand without any tools.

Five Key Features

Four-point anti-vibration system: four independent spring sets inside the base absorb vertical impacts and horizontal vibration, so less shaking reaches the camera's optical stabilisation.

One-click lock: one press of the red button secures the phone, another releases it, both one-handed.

10 mm silicone padding: micro-dampers at all four corners hold the phone in place and will not scratch its back.

Tool-free mounting: the screw-on clamp fits 17.5 to 30 mm handlebars, from an electric scooter to a motorcycle.

Tested mechanism: 10,000 lock cycles and 3,000 phone insertions according to the supplier's internal testing.

Four-point anti-vibration protection

Inside the base there are four independent sets of springs arranged in a square around the central axis. This layout damps vibration in two axes at once: vertical impacts from potholes and cobblestones as well as horizontal oscillation from the motor or the wheels of an e-bike. A module with a single damper works mainly in one axis, while a set of four springs responds to the chaotic impacts that arrive from all directions at the same time while riding. The biggest difference shows on the camera: phone manufacturers warn that long-term strong vibration damages the optical stabilisation mechanism, and on handlebars that mechanism is the most exposed of all.

One-Press Lock

The phone is inserted from the top and secured by pressing the red button. Releasing it works the same way—a single press opens the clamp. Both clamp arms are mechanically linked, meaning they open and close symmetrically in a single motion, allowing the entire operation to be handled with one hand. You'll notice the difference especially during daily commutes, where you mount and remove your phone multiple times a day, often while wearing gloves or in a rush.

10 mm Silicone in All Four Corners

The gripping surfaces inside the clamp are lined with a 10 mm thick vulcanized silicone pad. The silicone serves two purposes: in each of the four corners, it acts as a micro-dampener for minor shocks that bypass the base springs, while also preventing the phone from shifting during sharp turns or hard braking. As a result, the phone does not rest on hard plastic, but on a material that yields slightly under pressure and bounces back. The soft surface will not scratch the back of your phone or its case, making the mount suitable even for caseless phones.

Tool-Free Mounting on 17.5 to 30 mm Handlebars

The clamp slips onto the handlebar and tightens by hand—no wrenches or screwdrivers needed. The 17.5 to 30 mm range covers everything from the slim bars of e-scooters and kids' bikes to thicker MTB and motorcycle handlebars, so a single mount can serve your entire fleet at home. The ball joint beneath the clamp lets you rotate the phone to the desired viewing angle and lock it into place. The mount is also suitable for installation on a rearview mirror stem (please verify the specific diameter before ordering).

Tested Locking Mechanism

The lock and clamp are among the most stressed parts of the mount, as they are used on every ride. Supplier internal testing on model YYS-683 included a lock test of 10,000 open-and-close cycles and an insertion test of 3,000 phone insertions and removals—both retaining smooth mechanism operation throughout. Additional testing included thermal tests and a bump test simulating vibrations during high-speed riding.

One Mount for Bikes, E-Bikes, Scooters, and Motorcycles

The clamp grips the phone around its perimeter, eliminating the need for a dedicated phone case or magnetic plate stuck to the back of your device. The 4.7 to 6.8-inch range accommodates standard to large models, including those with prominent camera modules. The ball joint allows you to offset the phone from the handlebar centerline and tilt it toward the rider, ensuring it fits neatly beside displays and control units on e-bikes. This makes it easy to switch the same mount between different rides without having to buy a second one.

Dimensions and Handlebar Clearance

Weighing just 164 g, the mount has virtually no impact on bike handling, even with a phone clamped in. When collapsed, it measures 96.3 x 141.6 x 32.5 mm; when fully opened to fit maximum phone sizes, it measures 96.3 x 191 x 32.5 mm. On bikes with handlebar bags or top-mounted headlights, keep this height in mind. It takes up a single mounting spot on your cockpit, leaving ample room beside it for a bike computer or e-bike display.

Technical Specifications

Parameter | Value
--- | ---
Model | MO-BPH-AS-B1
EAN | 8594215998785
Compatible Phones | 4.7 to 6.8 inches
Handlebar Diameter | 17.5 to 30 mm
Compatible Vehicles | bicycle, e-bike, scooter, electric scooter, motorcycle
Anti-Vibration System | 4 sets of spring dampeners, quadruple arrangement
Silicone Pad | 10 mm, vulcanized silicone
Lock | one-click, red button, synchronized clamps
Mounting | tool-free, screw clamp, ball joint
Material | ABS + PC, silicone
Color | black
Dimensions (W x H x D) | 96.3 x 141.6 x 32.5 mm
Dimensions with Clamps Open | 96.3 x 191 x 32.5 mm
Weight | 164 g
Material Testing | REACH 253 SVHC, PAHs, phthalates, cadmium, SCCP: passed
Warranty | 24 months


Package Contents
1× Mobile Origin Bike Phone Mount B1 with Shock and Vibration Absorption.
1× User manual.