Extralink POE-48-24W-G | PoE Power Supply | 48V, 0.5A, 24W, Gigabit, AC cable included (EX.14190)

Ethernet LAN Yes Input voltage 230.0000 Output voltage 48.0000 Product colour black Purpose poe_adapter Input frequency 50.0000 Power over Ethernet (PoE) Yes Built-in fan No Output current 0.5000 Power over Ethernet (PoE) voltage 48.0000 Power supply type auto_indoor Output power 24.0000 Cooling type passive Ethernet interface type gigabit_ethernet Built-in display No {"non_mandatory_name":"Cables included","non_mandatory_value":"AC"}, {"non_mandatory_name":"Detachable power connectors","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Easy to install","non_mandatory_value":"Yes"}, {"non_mandatory_name":"LED indicators","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Power adapter included","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Power current type","non_mandatory_value":"AC-to-DC"}, {"non_mandatory_name":"Power protection features","non_mandatory_value":"Overload | Short circuit"}, {"non_mandatory_name":"RJ-45 ports quantity","non_mandatory_value":"2.0000"} Extralink 48 V 24 Watt Gigabit PoE Power Supply.
The Extralink PoE power adapter (power adapter) supplies power through selected strands of twisted-pair cable to network devices such as media converters, access points, cameras, etc. The 48V 0.5A PoE power adapter enables Gigabit Ethernet network data transmission while providing power over a single cable. This model allows transmission at Gigabit Ethernet speeds, is a Passive PoE solution and is not compliant with the IEEE 8023af/at standard. Unlike power supplies with a 5.5/2.1mm jack connector, the presented device allows you to directly power Gigabit PoE devices without additional network accessories.
The power supply with two RJ45 ports is equipped with a 1.2-meter long power cable terminated with a cloverleaf connector. One port is connected to the device to be powered, and the other socket is used to connect a switch or router with a patchcord. The device can be mounted in residential or tele-technical rooms or in racks.
The LED indicates the correct operation of the device. If one of the protections, short-circuit or overload, is triggered, the power supply cuts off the voltage to the device. After the failure ceases, the voltage is restored automatically