Ubiquiti ECS-24-POE (1050W) ENTERPRISE-GRADE 24-PORT, LAYER 3 ETHERLIGHTING POE+++ SWITCH, 10 GBE RJ45, 25G SFP28 (ECS-24-POE-U)

Basic switching RJ-45 Ethernet ports type 13502__10g_ethernet_100_1000_10000 Basic switching RJ-45 Ethernet ports quantity 24.0000 Power source 1390__ac Height 43.7000 Width 442.4000 Depth 496.0000 Product colour 1766__grey Switching capacity 460.0000 Networking standards 1802__ieee_802_1x, 1802__ieee_802_3bt Power over Ethernet (PoE) Yes Redundant power supply (RPS) support Yes Switch type 3769__managed Rack mounting Yes Housing material 5214__sgcc Number of power supply units 2.0000 MAC address table 128000.0000 10G support Yes Form factor 771__1u AC input voltage 100.0000 Display type 9104__lcm Power consumption (max) 2400.0000 Weight 9460.0000 Power supply included Yes {"non_mandatory_name":"10G Ethernet (copper) ports quantity","non_mandatory_value":"16.0000"}, {"non_mandatory_name":"2.5G Ethernet (copper) ports quantity","non_mandatory_value":"8.0000"}, {"non_mandatory_name":"AC input frequency","non_mandatory_value":"50.0000 Hz"}, {"non_mandatory_name":"Broadcast storm control","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Cables included","non_mandatory_value":"Power"}, {"non_mandatory_name":"Compliance certificates","non_mandatory_value":"CE | Federal Communications Commission (FCC) | Industry Canada (IC) | National Defense Authorization Act (NDAA)"}, {"non_mandatory_name":"DHCP features","non_mandatory_value":"DHCP guarding | DHCP relay | DHCP snooping"}, {"non_mandatory_name":"Flow control support","non_mandatory_value":"Yes"}, {"non_mandatory_name":"IGMP snooping","non_mandatory_value":"Yes"}, {"non_mandatory_name":"IPv4 routes","non_mandatory_value":"256000.0000"}, {"non_mandatory_name":"Jumbo frames support","non_mandatory_value":"Yes"}, {"non_mandatory_name":"LED indicators","non_mandatory_value":"Activity | Link | Status"}, {"non_mandatory_name":"Link aggregation","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Loop protection","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Mounting brackets included","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Multicast support","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Operating relative humidity (H-H)","non_mandatory_value":"10 - 90%"}, {"non_mandatory_name":"Operating temperature (T-T)","non_mandatory_value":"-5 - 40 °C"}, {"non_mandatory_name":"Packet buffer memory","non_mandatory_value":"8.0000 MB"}, {"non_mandatory_name":"Port mirroring","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Power connector","non_mandatory_value":"AC-in jack"}, {"non_mandatory_name":"Power over Ethernet (PoE) power per port","non_mandatory_value":"90.0000 watt"}, {"non_mandatory_name":"Power over Ethernet (PoE) type supported","non_mandatory_value":"PoE+ | PoE++ (4PPoE)"}, {"non_mandatory_name":"Rack mount kit","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Rack rails","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Rate limiting","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Redundant fans support","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Reset button","non_mandatory_value":"Yes"}, {"non_mandatory_name":"SFP module slots quantity","non_mandatory_value":"2.0000"}, {"non_mandatory_name":"SFP28 ports quantity","non_mandatory_value":"2.0000"}, {"non_mandatory_name":"Static route","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Switch layer","non_mandatory_value":"L2+/L3"}, {"non_mandatory_name":"Throughput","non_mandatory_value":"230.0000 gigabit per second"}, {"non_mandatory_name":"Total Power over Ethernet (PoE) budget","non_mandatory_value":"1050.0000 watt"}, {"non_mandatory_name":"VLAN support","non_mandatory_value":"Yes"}, {"non_mandatory_name":"Virtual LAN features","non_mandatory_value":"Voice VLAN"} Ready for intensive networking
The Ubiquiti ECS-24-PoE (1050W) is a switch designed for environments such as enterprise campus 24 PoE - that is, complex campus or office networks where high availability and scalability are required. This model combines PoE power , 2.5/10/25 GbE ports , Layer 3 support, and Etherlighting™ technology that allows you to quickly identify the status of ports with light signaling
PoE power supply - maximum power on each port
The switch offers 24 RJ45 (Registered Jack 45) Ethernet ports , each of which supports PoE (Power over Ethernet) technology , delivering up to 90 watts of power per port. This means you can power devices such as WiFi 6E access points, PTZ (Pan-Tilt-Zoom - with pan and zoom) cameras or IP phones, without the need for external power supplies. The total available power is up to 2250 watts in split mode, allowing you to power your entire infrastructure from a single device.
Ethernet ports with high throughput
The Ubiquiti ECS-24-PoE model is equipped with 8 2.5 GbE RJ45 ports and 16 10 GbE RJ45 ports for high-speed communication between end devices and servers. In addition, you'll find 2 SFP28 (Small Form-factor Pluggable 28 - 25G fiber connector) ports , which offer speeds of up to 25 Gbps and allow you to connect the switch to your network backbone. Total switching capacity is 460 Gbps , and Etherlighting™ technology makes it easy to identify active ports, detect errors and diagnose without logging into the system.
Layer 3 - intelligent network traffic management
This model supports advanced Layer 3 (the third layer of the OSI model) features, such as DHCP (Dynamic Host Configuration Protocol - a protocol for dynamically assigning IP addresses), routing between VLANs and static routes. This allows you to effectively manage traffic between subnets , ensuring optimal performance and data isolation across segments. An extensive IPv4 routing table (up to 256,000 entries) allows you to create complex routing structures without additional equipment.
Security and reliability of power supply
The device has two hot-swappable (hot-swappable) power modules and four fans that can be replaced without interrupting the switch's operation. The redundant mode provides constant power even if one of the modules fails - the power availability is then 1050 W. The 1U chassis (rack height unit) fits standard server rooms, and its depth (496 mm) is between 650-1000 mm