Rosa3D Filament ABS+ black 1.75mm 1kg refill (ABS+-BLACK-175-1R-RO)

ABS+ material is a widely applicable engineering plastic with moderate shrinkage (0.4-0.7%).
Excellent processing properties such as good flow, bright, vivid colors, and very good layer adhesion allow for a wide range of applications for this filament.

ABS+ has high impact strength and is impact resistant.

ABS+ from ROSA3D gives an elegant semi-matte finish to the surface of prints. It can be smoothed with acetone.

APPLICATION
- Prototypes of machine parts, gadgets, exhibition models
- Electronic components
- Computer parts
- Toys: building blocks, car components, educational aids

HOW TO PRINT
extrusion temperature: 230-270°C, bed temperature: 80-110°C
Printing in a closed chamber on a heated bed is recommended. If there are problems with adhesion, we recommend using an adhesion agent. Print cooling is recommended. Its power should be adapted to the capabilities of the printer and the geometry of the model being printed.

NOTE: Printing in a well-ventilated room is recommended. Do not stay in the room for long periods of time when printing with an open chamber due to the irritating smell and fumes, which may cause dizziness or headaches in sensitive people.

TECHNICAL PARAMETERS
Diameter 1.75 mm
Diameter tolerance +/- 0.05
Ovality tolerance +/- 0.02
Net weight 1000 g/ 2500 g
Print temperature 230-270 °C
Bed temperature 80-110 °C

PHYSICAL PARAMETERS
Density 1.05 g/cm3
Odor irritating
Elongation at break 2.5 %
Tensile strength (at break) 44 MPa
Tensile modulus 2276 MPa
Heat deflection temperature 99

Refill pack - plastic spool is not included in the set - a reusable spool can be printed, the drawing can be downloaded here