AXAGON USB 3.0 - 2.5" HDD SATA | ADSA-1S6 | SATA 6G | USB 3.0

A compact AXAGON ADSA-1S6 SLIMport6 high-speed adapter with USB 3.0 and SATA 6G interface intended for easy connection of SSD or 2.5" SATA disks.

A handy tool to quickly connect an SSD or laptop disk, including boot support.

UASP support significantly increases transmission rates, especially when working with small files in the queue.

TRIM feature support limits the gradual degradation of SSD performance over time.

Reading of S.M.A.R.T. information monitors the condition of the connected disks. Supports spinning down of connected disks as well as the adapter.

Installation can be handled even by a layman - the disk connects to the adapter and the adapter to the computer's USB port; the rest is done automatically.

Minimum dimensions and weight, along with an enclosed disk case, make the product ideally suited even for mobile use.

Features:
• Compatible with USB 3.0 and backward compatible with USB 2.0.
• Supports transmission rates of 12 / 480 / 5000 Mb/s (low / full / high speed).
• Supports 2.5" SATA III / II / I disks of all capacities.
• Compliant with Serial ATA 3.1 specification (SATA/600), transmission rates of up to 6 Gb/s.
• Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
• Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
• The total bandwidth / transmission rate of the adapter is determined by the USB 3.0 interface used (theor. 5 Gbit/s).
• Supports UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport).
• Supports booting from an SSD/HDD connected via a USB adapter.
• HDD Auto Spindown - automatic spindown of a disk after a period of inactivity lasting 22 minutes.
• HDD Turn Off - turns off the disk after removing the device or shutting down the PC.
• Possibility to connect your device while running thanks to Hot Plug support.
• Full Plug and Play support.
• Connection via USB 3.0 micro B female connector.
• A USB 3.0 cable (USB 3.0 Type A male / USB 3.0 Type B male, 10 cm long) is included.
• Supplying power via the USB 3.0 bus up to 900mA from one USB port is sufficient in all cases.
• A blue LED indicates the connection to the computer's USB port (steady light) and data transmission (blinking).
• Compact adapter dimensions: 70 x 21 x 10 mm.
• Adapter weight only 11 g, USB cable weight 18 g.
• Simple plastic case holds a 2.5" disk max. 9.5 mm high with the USB adapter connected (the USB cable is led out through a hole in the case).
• For thin 7mm SSDs/HDDs, foam pads are included for a better fit in the case.
• The case can also serve to transport or store the adapter itself without the disk, with the USB cable inside the case.
• Case dimensions: 122 x 78 x 19 mm.
• Case weight: 40 g.

Supported OSs:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
• USB 3.0 - SATA 6G adapter,
• USB 3.0 cable 10 cm,
• plastic case for 2.5" disk and USB adapter,
• foam pads for 7 mm HDDs and SSDs,
• Packed in a cardboard box with the installation procedure included. Axagon ADSA-1S6 USB 3.0 - 2.5" HDD SATA. Product type: HDD/SSD enclosure. Number of storage drives supported: 1, Storage drive size: 2.5", Supported storage drive interfaces: Serial ATA, Serial ATA II, Serial ATA III. Data transfer rate: 5 Gbit/s. Hot-swap. Product colour: Black. USB connector type: USB Type-A