Kirami MF250 mass filter with flow-through set (3042)

Kiramin MF250 is a small and handy mass filter that effectively cleans the bath water of jets and small swimming pools. The filter cleans all dirt, leaves, bathing debris, and other impurities in the water. In a mass filter, the water passes through the mass and the impurities are trapped in the filter mass. The mass in the filter can be either traditional filter sand or Kirami filter fibre. The filtration mass can be washed and rinsed with the filter backwash and rinse functions. When necessary, the filter media should be replaced with a new one.

The package includes a stand, 250W pump, 4-way control valve, hose with fittings and filter bag, 500g Kirami filter fibre and drain kit. The device itself is equipped with a hose with 32 or 38 mm internal diameter.

The device must always be connected to a socket with a residual current device. The filter must not be switched on or off during bathing.

The flow-through set includes:

• Flow-through 2½” male x 1½” female (for M6 female plug)
• Studs, 3mm and 8mm for wall
• Nut 2½” female
• 3 pcs of protective arrows, 3 pcs M6 screws for fixing the grilles
• 3 pcs M6 screws for fixing the grilles
• All to be installed in the pool, if the filter is purchased with the pool.
• 5 pcs hose clamp (clamp)
• 1 pcs 1 1/2” male/38mm hose connector 90 degrees
• Hose tape roll
• Hose 5m (length and color may vary)
• Short replacement plug and locking bolt
• Flow-through plug M6 male