Bambu Lab 3D printer (PF002-A-EU)

The Bambu Lab A1 3D printer represents the cutting-edge technology that is revolutionising the 3D printing industry. With innovative additive manufacturing technologies, this printer sets new standards for accuracy, speed and versatility. Its sleek design and user-friendly interface make the Bambu Lab A1 the perfect addition to any professional work environment or creative studio.

Key Features:

• Active Flow Compensation: The A1 uses a high-resolution, high-frequency eddy current sensor to measure nozzle pressure. The algorithm actively compensates the flow rate based on measurements to ensure accurate extrusion.
• Fully automatic calibration: The A1 performs all calibrations independently. It automatically calibrates the Z-offset, bed level, vibration resonance and nozzle pressure for each print job.
• Quick-change nozzle: A new generation quick-change nozzle that attaches and detaches with a single clip.
• Active motor noise reduction: The A1 calibrates parameters to match the slight differences in each motor, compensating for unwanted motor noise.
• Bed Slinger, CoreXY speed and quality: Full metal slideways, rigid frame, nozzle pressure sensor, acceleration sensors, powerful MCU and advanced mobile control system enable high-quality printing with up to 14 minutes of Benchy printing, straight out of the box without special materials.
• Sync to Bambu Studio and Bambu Handy: You can control and monitor the printer remotely via the Bambu Studio or Bambu Handy app. The built-in camera also allows you to record time-lapse videos.

Specifications:

• Recommended filaments: PLA, PETG, TPU, PVA
• Compatible filament diameter: 1.75 mm
• Maximum nozzle temperature: 300 ºC
• AMS support: Yes
• Extruder type: Direct drive
• Recommended maximum print speed: 500 mm/s (depending on material)
• Print volume: 256 mm x 256 mm x 256 mm
• Maximum bed temperature: 100 ºC
• Build surface: PEI sheet
• Build surface mounting: magnetic
• Build chamber during process: open
• Number of extruders: 1

Installation space/requirements:

• Overall dimensions: 385 mm x 410 mm x 430 mm
• Net weight: 8 kg
• Maximum power consumption: 1300 W
• Voltage: AC: 100 V / 240 V (50-60 Hz)

Accessories:

• HEPA filter: No
• Filament end-of-life sensor: Yes
• Filament clogging sensor: Yes
• Power cut-off system: Yes
• Touchscreen: Yes
• Camera: Yes

Connections:

• USB port: No
• WLAN: Yes