AXAGON USB3.2 Hub with 3 ports, supports SD/MicroSD cards, and has a 0.2M cable, model HMA-CR3A

Metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-CR3A connects up to three USB devices to a laptop or computer and also adds an SD / microSD card reader.

The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. The elegant, finely structured body surface is resistant to fingerprints. Rubber pads prevent slipping on the table. The permanently fixed 20 cm long USB cable is ideal for users of mobile devices.

This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, it provides a transfer speed of up to 5Gb/s. The hub will also charge phones and tablets with a current of up to 1.5A/5V. Thus, the hub can easily charge an Android smartphone, Apple iPhone, Apple iPad, etc.

The card reader supports all current versions of SD and microSD cards, including SDXC and microSDXC with capacities up to 2TB. High data transfer speed is ensured by the USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them.

The USB multi-port hub is the ideal accessory for ultrabooks with a small number of USB-A ports and a missing card reader. The hub is even capable of connecting to phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard, mouse, and card reader to your phone or tablet.

Input:
• 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• Connecting USB type A male connector on a fixed 20 cm long cable.

Output:
• 3x SuperSpeed USB port, USB-A female connectors.
• Supports transfer rates of 5,000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).
• The total bandwidth / transfer rate of the device is provided by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).
• The USB hub handles the permanent connection of several external drives.

Card reader - two slots:
• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro.

The reader supports the following flash card specifications:
• SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit).
• Support for SD 3.01 and SD Jukebox applications (CPRM functions).
• Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s.
• Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.
• 2 LUN - in file managers, the reader is indicated as two disk drives.
• FAT 12 / 16 / 32, NTFS, exFAT (FAT 64) file format support.

Other features:
• Possibility to connect your device while running thanks to Hot Plug support.
• Full Plug and Play support.
• Sleep mode support.
• The high-quality shielded cable ensures high communication speed and minimal undesirable interference.
• White LED indicates the connection to the computer's USB port.
• Power supply via USB bus (USB bus power).
• Dimensions 84 x 24 x 18 mm.
• Weight 42 g (incl. cable).
• USB cable length 20 cm.

Power / Charging:
• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, 3.5" external drive) to all four ports.
• The USB hub can also handle the permanent connection of several external drives simultaneously.
• Charge mobile devices (including iPad) with a current of up to 1.5A in each of the hub ports. The total charging current (which is divided among the ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port).

Supported OS:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32 and 64-bit versions of Windows OSs are supported), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, most versions of Android.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
• SuperSpeed USB multi-port hub with fixed 20 cm long USB cable,
• printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
• packed in a cardboard box with a hanging hole.Axagon HMA-CR3A Metal USB 3.2 Gen 1 multi-port hub with three USB ports and card reader. Connectivity technology: Wired, Host interface: USB 3.2 Gen 1 (3.1 Gen 1) Type-A. Product colour: Black, Compatible memory cards: MMC, MMC Mobile, MicroSD (TransFlash), MicroSDHC, MicroSDXC, MiniMMC, MiniSD, MiniSDHC, RS-MMC,..., Data transfer rate: 5 Gbit/s. Power source type: USB, Power connector: USB Type-A, USB cable length: 0.2 m. Width: 24 mm, Depth: 18 mm, Height: 84 mm. Quantity per pack: 1 pc(s), Package width: 100 mm, Package depth: 28 mm