deepcool MORPHEUS ATX case, with side window, white (R-MORPHEUS-WHAPA1-G-1)

Modularity has taken on a new look, and it comes in the form of DeepCool's internally reconfigurable ATX+ case: MORPHEUS. With unmatched compatibility and a spacious layout, MORPHEUS is the best choice for DIY modders or other PC enthusiasts.

A new perspective on modularity
Easily switch between the classic single-chamber configuration and the dual-chamber layout with a simple swap of parts. Everything you need to switch between the two configurations is included, as well as a vertical graphics card bracket (with Gen 4.0 riser cable).

Air flow to a new level
Highly breathable panels surround the MORPHEUS case on the front, right, top, bottom, back and even the top of the power supply cover. Also included are mesh filters that fit the front, top and bottom panels to keep dust out.

Extensive cooling capacity for different fan options
13 120 or 140 mm fans or up to six 200 mm fans can be installed in the MORPHEUS case. Modular fan rails help to adjust different fan sizes.
The case also supports up to three 420mm coolers at the same time. 420 mm coolers can be installed in front, on the ceiling or below and on the side of the motherboard.

140 mm trinity fans
A pre-installed, ultra-convenient fan kit with three clear 140mm ARGB fans combined into one 420mm unit. These fans require only one set of PWM and ARGB cables to be connected, greatly reducing the number of cables.

bits!
Add a little personality with fun rubber squares! Pixels can be used almost everywhere in the MORPHEUS case's mesh panels. Leave messages for others, add your own logos or create your own 8-bit character!

- ATX+ form factor supports E-ATX motherboards, video card length up to 480 mm, 195 mm high coolers and several 420 mm coolers

- Built-in display for displaying temperatures (requires a free USB 2.0 header connection)

- In the connector panel, four USB 3.0 ports, a Type-C port, an audio connection and an LED control button for controlling the integrated ARGB controller

Features:

• Case type: Mid Tower, ATX+ / E-ATX
• Material: ABS, SPCC, tempered glass
• Internal 2.5" slots: 2+1
• Internal 3.5" slots: 2
• Front panel connections: 4 x USB 3.0, 1 x Type-C, 1 x mic/audio
• Additional card slots: 9
• Maximum height of processor cooler: 195 mm (single-chambered), 132 mm (dual-chambered)
• Maximum video card length: 480 mm
• Maximum length of power supply: 180 mm
• Dimensions: 528 × 250 × 551 mm
• Weight: 15.5 kg
• Motherboard support: Mini-ITX / Micro-ATX / ATX / E-ATX
• Comes with 3 x 140mm ARGB fans

Fan locations:

• Front: 3x 120 / 3x 140 / 2x 180 / 2x 200 mm
• In the ceiling: 3x 120 / 3x 140 / 2x 180 / 2x 200 mm
• On the side: 3x 120 / 3x 140 mm (3 x 140 mm installed)
• Bottom: 3x 120 / 3x 140 / 2x 180 / 2x 200 mm
• Rear: 1x 120 / 1x 140 mm (single-chamber layout)
• Power supply cover: 3x 120 / 3x 140 mm (single chamber layout)

Liquid cooler support:

• Front: 120 / 140 / 240 / 280 / 360 / 420 mm
• In the ceiling: 120 / 140 / 240 / 280 / 360 / 420 mm
• On the side: 120 / 140 / 240 / 280 / 360 / 420 mm (two-chamber layout)
• Bottom: 120 / 140 / 240 / 280 / 360 / 420 mm
• Rear: 120 / 140 mm (single-chamber layout)