Armac UPS ARMAC OFFICE O/850F/PSW LINE-INTERACTIVE 850VA 2X SCHUKO OUTLETS LCD PURE SINE WAVE METAL CASE

Preču attēliem ir ilustratīvs. Oriģinālais produkts var atšķirties, tāpēc, lūdzu, skatiet produkta specifikācijas preces aprakstā.

Noliktavā

Cena

€ 105.90

E-veikala cena var atšķirties no veikalu cena.

Punkti +105

Garantijas periods24 mēneši

Piegādes laiks un iespējas

5-9 dienas
5-9 dienas
5-9 dienas
5-9 dienas
5-9 dienas

Produkta apraksts

Armac PSW series UPS - O/850F/PSW was designed for a wide range of home and office applications to be able to maintain electronic equipment during power outages safely.

Paused operation, failure of electronic devices can cause not only severe financial losses but also the loss of essential data. That is why it is worth investing in the UPS model O/850F/PSW, which will prevent many unpleasant effects of potential overvoltage.

WIDER FIELD OF APPLICATION

UPS O/850F/PSW is a high-quality uninterruptible power supply with Line-interactive topology.
The aspect that distinguishes this series of uninterruptible power supplies from the standard models in this group is the pure sine wave on the UPS output sockets. For the user, this means the broader possibility of using an emergency power supply to support the operation of equipment with an electric motor or heater, e.g., laser printers, scanners, garage and entry gates, electric blinds, central furnaces, etc.

EFFICIENT, FUNCTIONAL SOLUTION

Uninterrupted power supply model was created for tasks like protection of PC or office equipment, e.g., a printer. The UPS can cope with it as a result of its 9Ah battery, with a Power Factor of 0.6. What is more, this model has 2 French / Uni-Schuko output sockets [with the option to choose the right model] allowing you to protect multiple devices at once.

CONVENIENT OPERATION MONITORING SYSTEM

The Armac uninterruptible power supply communicates via the USB port. That allows you to connect the UPS to the PC and issue commands or monitor the operation of the device using PowerManager II software. It is a convenient and straightforward way to ensure proper protection for valuable equipment.

ARMAC UPS SAFETY - OVERLOAD PROTECTION

Importantly, each Armac emergency power supply system is equipped with an overload protection module. When the UPS is overloaded during its regular operation, the device will automatically safely shut down the power supply to the equipment connected to it. This solution strengthens the safety and comfort of using Armac uninterruptible power supplies.

SECURE INTERNET AND TELEPHONE - RJ-11/RJ-45 CURRENT PROTECTION

To further expand the range of devices that will be safe in the event of a surge, the Armac UPS has
2 x RJ-11/RJ-45 ports on the back, dedicated for the telephone line and ICT cabling. If any surges or voltage spikes occur on the network, the UPS will immediately detect and correct them so that a safe signal is always sent to telephone and network devices.

MICROPROCESSOR CONTROL – EFFECTIVE SURVEILLANCE OF SENSITIVE DEVICES

The proper work of the emergency power supply is supervised by a specially built-in processor that controls the parameters of the device itself, its correct operation and the power supply of connected devices. The technology used in the UPS also ensures automatic battery charging in Stand-By mode, as well as automatic start-up feature after the power supply returns.

AUTOMATIC VOLTAGE STABILIZER – AVR

With the implemented of AVR feature in O/850E/PSW, standard solutions commonly found in Line-interactive UPS are improved. That is due to the use of the network autotransformer, which regulates the voltage transmitted to devices connected to the UPS on an ongoing basis. AVR, therefore, provides comfort and high performance.

• If the voltage is about 255V or higher, then UPS will transmit the AC power to the autotransformer (AVR) and the output voltage will be within the allowable range from 195 to 255V.

• If the voltage is approximately 195 V or less, then UPS will transmit the AC power to the autotransformer (AVR) and the output voltage will be within the allowable range from 195V to 255V.