Elegoo PLA+ Filament (Star Gray) (50.203.0163)

PLA+ ELEGOO Filament (star gray) ELEGOO filament in the shade of star gray is a versatile solution that will work well in both technical prints and decorative projects. The neutral, matte color ensures legibility of details and matches modern aesthetics. The product is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament. Durability and precision With increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation. Convenience and compatibility The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament. General ManufacturerELEGOOModel50.203.0163ColorStar grayWeight1 kg Recommended print settings Drying settings before printing55 ± 5°CAmbient temperature and humidity≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)Nozzle temperature200 - 230°CTable temperature (depending on printer and surface)35 - 65°CType of working surfaceTextured PEI (polyetherimide - a durable material that holds prints well) or other compatible platesPrinting speedLess than 280 mm/sec Physical properties Density1.30 g/cm³Melting point161°CDeflection temperature under load56°CSoftening temperature (Vicat test)63°C Mechanical properties Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest)38 ± 2 MPaElongation at break (XY)7,9% ± 1,6%Bending strength (XY)74 ± 4 MPaBending modulus (XY)2979 ± 156 MPaImpact strength (XY)65.5 ± 3.6 kJ/m²