Anycubic Kobra 3 V2 3D printer (K3V2-IP-O)

Anycubic Kobra 3 V2 3D Printer

Meet the Anycubic Kobra 3 V2, a 3D printer that offers precise and fast printing. Its enhanced LeviQ 3.0 automatic leveling system with a 60 mm Y-axis and SG15 bearings guarantees perfect adhesion and flawless first layers, while speeds of up to 600 mm/s² and acceleration of 20,000 mm/s² reduce turnaround time for even the most demanding projects. Thanks to "plug & play," installation and initial startup take less than 15 minutes, while smart features such as resuming printing after power loss, filament detection, and timelapse on the built-in 720p camera ensure continuous and safe operation. The whole thing is complemented by the powerful Anycubic ecosystem, which gives you full control over every printing step.

LeviQ 3.0 Automatic Leveling

Forget about tedious manual table calibration. The innovative LeviQ 3.0 system with a 60 mm Y-axis and SG15 bearings on the X-axis takes care of the perfect alignment of each layer. Thanks to the elimination of offsets in the Z-axis, you will get reliable adhesion of the first layer, which significantly increases the success rate of prints even on the most geometrically complex projects.

Express Speed and Reliable Performance

You no longer have to wait long to print your designs. The Kobra 3 V2 achieves a maximum print speed of up to 600 mm/sec (300 mm/sec by default) and acceleration of up to 20,000 mm/sec², resulting in a small boat model in less than 13 minutes. The improved nozzle effectively minimizes filament leakage, and the optimal width of the working tunnel ensures comfort when working on any project.

Unpack and Run

Assembling and starting the printer takes less time than your morning coffee—the intuitive, simplified design allows you to start your first print in a quarter of an hour after unpacking. Sturdy twin pull bolts, a precision bearing system, and a metal quick-release coupler guarantee the stability of the entire design and allow for instant nozzle changes when needed.

Smart Monitoring and Security

The Anycubic Kobra 3 V2 has a filament sensor that detects its condition and automatically refills it. In addition, the printer resumes operation after a power outage or unexpected power loss. The built-in 720p timelapse camera allows you to document the entire process, which is great for order presentations or creating social media content.

Full Control in the Anycubic Ecosystem

With Anycubic Slicer Next (based on the Orca engine), you'll prepare models for printing from the LAN, managing multiple projects simultaneously and skipping unwanted elements. Using Anycubic, you gain remote access to the printer, real-time progress monitoring, and a time-lapse photography option. In addition, the Makeronline platform offers a rich library of pre-made models and one-click cutting and printing.

Comprehensive Feature Set

The Anycubic Kobra 3 V2 is more than a printer. It's a tool that integrates top-notch automation and intelligent software. With a capacitive 4.3-inch touchscreen and control via panel, app, and USB, you have complete freedom to choose how and where to work on your projects.

Included

Kobra 3 V2 printer
Print head
Touchscreen
Spool holder
Cable holder
Cleaning wipers
Screw M2x14 x2
Screw M3x6 x4
Screw M4x16 x2
Screw M3x10
Screw M3x8
Power cord
Cable organizer x2
USB disk
Filament tubes
Set of wrenches
Allen screws 4.0, 3.0, 2.5, 2.0, 1.5
Sample of filament
Nozzle cleaner
Grease
Camera
Instruction manual

Manufacturer: Anycubic
Model: K3V2-IP-O
Weight: 9.37 kg
Supported materials: Kobra 3 V2 supports only PLA, TPU, PETG, ABS materials
Dimensions: 452.9 x 504.7 x 483 mm
Power source: 400 W
Multicolor printing: For multicolor printing, the ACE Pro is required
Nozzle: Maximum temperature 300℃
Print size: 255 x 255 x 260 mm
Maximum table temperature: 110℃
Maximum print speed: 600 mm/sec
Touch screen: 4.3-inch
Active drying: ACE Pro required
Auto leveling mode: LeviQ3.0 + no Z-axis offset + design optimization
Nozzle diameter: Standard 0.4mm, options: 0.25/0.6/0.8mm
Filament detection and print resume: Automatic filament replenishment
Resume after power loss: Supported
Video monitoring: Standard HD camera, supports 720P
Timelapse mode: Supported
AI detection: Print error ("spaghetti") detection
Object skipping and area leveling: Supported
Local network mode: Supported
Control and printing methods: Printer, Anycubic Slicer Next, Anycubic application, USB (print only)