PHILIPS 3000 sērijas mitrinātājs HU3916/10 (HU3916/10)

With comfort and clean air in your home with the help of the sun sensors. NanoCloud technology humidifies the air and removes up to 99% of bacteria from the air (1).

NanoCloud technology

Unique NanoCloud technology delivers clean water through hyöyryä hyödyntämällä natural evaporation. NanoCloud technology produces a finely divided höyry that is low in humidity and makes it difficult for bacteria and dirt to adhere. It humidifies the air with up to 99% less bacteria than conventional ultra-humidifiers. (1)

Efficient humidification

Three fan speeds and automatic settings ensure the efficiency and comfort of your choice. With an output of 300 ml/h, the device effectively humidifies a room of up to 45 m2. (2,3)

Humidified air is evenly distributed

A 360-degree diffuser distributes humidified air evenly throughout the room. The finely divided NanoCloud höyry is distributed over a wide area and prevents excessive humidification. The result is effective humidification, especially in large rooms.

Automatic humidification

The automatic humidity sensor monitors air quality and automatically adjusts settings to maintain humidity at your chosen level: 40, 50 or 60%. A water humidifier indicator lights up when it's time to turn on the humidifier, and the humidifier shuts off automatically when it runs out of water.

Real-time feedback

The digital humidifier provides real-time humidity, and has myös indicators for water, timer and operating mode.

No drip or splash on floors

The nanoCloud technology produces no drip or splash on surfaces (4). The large droplets produced by ultraviolet lamps can cause wetting of the environment and contain minerals that can accumulate as a white layer on light-coloured surfaces. The tiny NanoCloud particles do not contain minerals, so surfaces stay clean.

Safe and effective

NanoCloud technology uses natural evaporation, which has been widely proven to be a hygienically safe and effective wetting method. No ions, chemicals or ozone (5) are used and no water is introduced, eliminating the risk of burns.

Quiet room

The quiet room minimizes noise levels and ensures quiet and efficient operation during the night.

Reliable operation

High water capacity ensures uninterrupted humidification for several hours. It is easy to operate by simply lifting off the lid. The humidifier is easy to clean, the microwave keeps the appliance and the air clean and hygienic.

The NanoCloud delivers the same humidification performance as ultra-humidifiers, but uses less water and energy. No need for frequent rewetting, and it saves on energy costs.

Specifications

• Product dimensions (W x L x H): 250*250*375
• Product weight: 2.61 kg
• Water consumption: 3 liters
  
• Maintenance
• Modes: auto and yömode
• Manual speed settings: 1, 2, 3
• Humidity settings: 40%, 50%, 60%
• Cable length: 1.6 m
• Timer: 1–9 hours(a)
• Alt&time (6): 20 hours
• Energy säästävä
• Energy consumption: 25 W
• Power consumption: < 0.5 W
• Humidifier humidifier filter: FY3446 – up to 6 months
• Humidification capacity (2): 300 ml/h
  
• Humidification, room size (3): Up to 45 m2
• Air quality monitoring: Numerical
• Humidity indicator
• NanoCloud technology (1): Up to 99% reduction of bacteria

* (1) Compared to conventional ultrasonic cleaners without bacterial proliferation prevention technology, tested in an independent laboratory.
* (2) Testing: GB/T 23332-2018 by an external laboratory. Initial temperature 23±2 °C and relative humidity 30±2 % RH.
* (3) Calculated according to paragraph 7.3 of AHAM HU-1-2016 based on wetting performance tested in an external laboratory according to GB/T 23332-2018.
* (4) Furniture mineral fibres were tested in a third party laboratory over a 3-hour period, DIN 44973, IUTA e.V.
* (5) Testing: GB 21551.3-2010 in a third party laboratory. The levels of ozone, TVOC, PM10 and UV are below the limits.
* (6) Calculation based on a test with a 3 litre water solution, pumped at a speed of one. The humidification capacity is 150 ml/h